Plastic molding is called plastic molding. This molding process mainly uses vacuum suction produced by vacuum pump
to heat and soften PVC, PET, PETG, APTT, PP, PE, PS and other plastic plastic sheets after heating
and softening. Blister is divided into thin sheet Blister and thick sheet Blister according to sheet thickness.

1,The machine tools should be kept clean.

2,Periodically remove the worktable panel of the plastic suction molding machine and clean the dust on the bottom
of the workbench and the vacuum filter net to make the vacuum pipeline smooth.

3,Regularly check the working condition of the quartz tube in the electric heating furnace,
and replace the damaged quartz tube in time.

4,Regularly release the accumulated water in the air filter of the air source triplet, add proper amount of
lubricating oil to the mist sprayer, and adjust the amount of oil mist to the right amount.

5,Keep the oil level in the vacuum pump properly, the oil level is too high, the oil will overflow from the exhaust port,
the vacuum pump vacuum pump can not meet the requirement, and the vacuum pump will be damaged.
The vacuum pump's maintenance and maintenance are detailed in the vacuum pump specification.